GEAR AID – Cure Accelerator X adhesive curing accelerator

Cure Accelerator X (formerly known as Cotol-240) is a special liquid that significantly accelerates the curing process of Aquasure FD, SR and Seam Grip WP adhesives. It reduces the initial curing time to 15 minutes and ensures full curing after just 4 hours. The ideal solution when you need to quickly repair diving suits, fishing gear or other outdoor equipment.
Key features:
✔ Reduces the curing time of the adhesive to 15 minutes;
✔ Allows the adhesive to cure completely within 4 hours;
✔ Compatible with Aquasure FD, SR and Seam Grip WP adhesives;
✔ Preserves the elasticity and water resistance of the adhesives;
✔ Suitable for various materials: neoprene, rubber, nylon.
Technical specifications:
Volume: 30 ml;
Application: 2–3 drops per 1 cm² of the surface to be bonded;
Mode of action: accelerates the curing of polyurethane adhesives;
Compatibility: Aquasure FD, SR; Seam Grip WP;
Storage: in a sealed container, protected from direct sunlight.
Instructions for use:
Apply the adhesive to the surface to be repaired;
Spray 2–3 drops of Cure Accelerator X;
Join the surfaces and press them together for 15 minutes;
Full curing takes place within 4 hours.
Recommended products for similar applications:
• Aquasure FD/SR adhesive;
• Seam Grip WP seam sealant;
• McNett neoprene repair kit.
Warnings:
• Use only in a well-ventilated area;
• Avoid contact with eyes and skin;
• Keep out of reach of children;
• Store at a temperature between +5°C and +25°C.